First Aid Supplies

Haws Polar Unit Emergency Shower Skid Mounted Decontamination- Tempered Water System

Haws Polar Skid Decontamination Shower
Model 8760 Polar series is a skid-mounted decontamination emergency shower and tempering system for use in indoor areas that are protected from freezing. Each unit is equipped with a 20 gpm shower, 5 gpm eye/facewash and a 4 gpm drench hose mounted on a heavy-duty skid. Skid is a water resistant, polyurea membrane-encased, steel-reinforced wooden structure. Also included is a modesty curtain, protective wall, hot water supply and tempered water blending system. The Model 8760 polar unit is available with either a 119 or a 325 gallon storage capacity tank, as well as an instantaneous steam heat exchanger as options. Should the simultaneous operation of more than one shower be desired, Haws offers a high-flow blending system for the 325 gallon tank and steam heat exchanger systems. All tempered water systems incorporate fail-safe features including anti-scald protection and full flow cold water bypass. Haws Polar Unit Model 8760 is ideal as a stand-alone system or as a feeder to other remote Haws polar booth substations. Should the simultaneous operation of more than one shower be desired, as an option, Haws offers a high-flow blending system for the 325 gallon tank and steam heat exchangers.

Specifications
Multiple Drench Systems:
Shower: Model 8129FC 10-5/8" ABS plastic head with integral 20 gpm flow control in Safety Green.
Eye/Face Wash: 5 gpm Feather Flo® ABS plastic heads (Model SP21FC).
Drench Hose: 4 gpm hose with flag and ball valve.
Scald Valve: Model SP157A.
Alarm System: Standard alarm system is flow switch activated and provides local audible and visible alarms with dry hermetic relay contacts for remote alarm hookup. System includes silencing circuit with auto reset. Area light flashes and alarm sounds upon activation.
Flow Switch: 5 amp, DPDT, alarm activation at 2.2 gpm.
Blending System: Model TWBS.SH.
Water Heater: 4 kW, 240 VAC copper immersion heater or steam heat exchanger. Dual element thermostat with manual reset hi-limit protection.
Light: 100 Watt, green (normally on).
Skid: 4' x 8' heavy-duty galvanized steel frame with open steel grating and forklift slots. The base assembly is supplied with a protective barrier wall and modesty curtain to help promote safety and full decontamination.

Combination shower and eyewash is certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Plumbing Schedule 40 galvanized piping with brass and stainless steel valves.
Supply: 1-1/4" IPS.

Tempering System Options: Tank Systems
Option No. 21: 119 gallon tank: Stores enough hot water to provide a single 20 gpm shower for 15 minutes. Recovery time of up to 4 hours.
Option No. 22: 119 gallon ASME tank: Stores enough hot water to provide a single 20 gpm shower for 15 minutes. Recovery time of up to 4 hours.
Option No. 23: 325 gallon tank: Stores enough hot water to provide two 20 gpm showers for 15 minutes. Recovery time of up to 11 hours. Tank is insulated and jacketed.

Steam Systems When a steam supply is available, a Haws steam heat exchanger and mixing system is the best approach for efficient tempering, especially with multiple showers or recirculating systems. Standard steam system is sized to provide up to 35 gpm of 80 °F (26 °C) tempered water, and requires no recovery time. Higher flow systems are available.
Option No. 24: Steam heat exchanger, feed forward instantaneous heat exchanger. Requires 15 psig, max. 1300 lb/hr steam supply.

Electrical System Options
Standard system requires 208-240/120 VAC, single phase, 3 wire and ground. 40 amp electrical supply. Electrical systems can be provided to meet various environmental requirements. Select the electrical option that meets the environmental conditions where the Polar unit is to be installed.
Option 31: NEMA 4 water/dust tight when tank tempering system is selected.
Option 32: Class I, Division 2, Group B, C, Dand T2B.
Option 33: Class I, Division 1, Group C, D and T4.

*Other voltages available upon request.

Specify Polar unit model as follows: Model number, tempering system option, electrical system option. Example: 8760.22.32 is a Model 8760 equipped with a 119 ASME gallon tank, Class I, Division 2, Groups B, C, D and T2B electrical system.
Model 8760.23.31 shown

* Please contact our office for pricing- 800 506 0091.
* In order to provide you with an exact price, please fill out the Haws Tempered Water Questionnaire below and fax to 770 716 8384.

View product documentation

Can't Find What
You're Looking For?

Product Documentation

Haws Tempered Water Questionnaire

Haws 8760 Polar Unit Spec Sheet

Haws Polar Booth Emergency Shower Units

First Aid and Safety Online was developed as your single source for all of your first aid and safety supply requirements. The Polar Booth Emergency Shower Units by Haws Company offered here have been selected for our online store for their superior quality and value. We are your first aid source for maintaining compliance with OSHA regulations. With First Aid and Safety Online, you will never run out of needed first aid supplies to treat workplace injuries. Should you need a first aid or safety product not found in our online store, please contact our office (800 506-0091) and we will be happy to assist you in fulfilling your order.

Back to Haws Polar Booth Emergency Shower Units

Can't Find What You're Looking For?

First Aid Supplies and Safety Products

FIRST AID AND SAFETY ONLINE INC

First Aid Supplies

Safety Products

Haws Polar Unit Emergency Shower Skid Mounted Decontamination- Tempered Water System

Product Documentation

Haws Polar Booth Emergency Shower Units