Column Sentry Protector 8″ x 8″ Square Medium
Guaranteed Lowest Price- Call Us!
Column Sentry® CS2442-8S column protector is designed to fit around H, square, or round columns up to 8″x8″(20x20cm) in diameter. The outside diameter is 24″ (61cm). The original patented column protector. Tough, highly visible, easily installed, cost effective and versatile. An exclusive, patented air vent system allows air to escape during impact without splitting the sides. Rotationally molded from low density polyethylene. Stackable. Weatherproof, chemical resistant and UV stabilized. Bounces back impact after impact protecting structural columns from collision damage.
Lowest Price Guaranteed ! We will not be beat on price. If you see this Column Sentry Column Protector online for less call us and we will beat the price.
The size of the column will dictate the size of the Column Sentry. Carefully measure the length and width of the column area and find a corresponding size below. If covering an “I-beam” or “H-shape” column, make sure that the correct “web” and “flange” measurements before ordering. Also make sure there is nothing mounted on the column to prevent installation of the “H” sized Column Sentry. Keep in mind that a square will also fit over the “H” shape. For Fire Extinguishers see the Column Sentry FE.
Column Sentry® brand column protectors are available in a number of sizes designed to fit a variety of interior columns found in most buildings. All Column Sentry® products are 42″ (107cm) high. The products currently available are either
Small: 14″ (36cm) outside diameter, weighing 24 pounds(11kg)
Medium: 24″ (61cm) outside diameter, weighing 56 pounds (26kg)
Large: 33″ (84cm) outside diameter, weighing 75 pounds (34kg)
Extra Large: 38″ (96cm) outside diameter, weighing 100 pounds (46kg)
FE: Same outer dimensions as Medium; has an 8″x10″ cutout making them 34″ high at the cutout
Each individual size is oversized approximately 1/8″ and has an tolerance of +/- 1/8″.
Column Sentry® Column Protector is the original, patented column protector. Proven to be more than 80% more effective than knock-off column protectors.We offer great pricing on all Sentry Column Protectors along with friendly customer service.
All of the Column Sentry products are made of a linear low density polyethylene (LLDPE) which is stress-crack resistant. They have a wall thickness of .25″ and are UL Listed as UL94 Flame Class. Column Sentry can be shipped in the US via UPS or by Common Carrier at freight class 150 (14″, 24″ diameters) or Class 250 (33″, 38″ diameter).
Column Sentry® CS2442-8S column protector is designed to fit around H, square, or round columns up to 8″x8″(20x20cm) in diameter. The outside diameter is 24″ (61cm). Available in either standard or FE type for Fire Extinguishers
* This column sentry column protector requires extra freight charges based on your ship to zip code. We will contact you with actual freight rate prior to processing your order. Ships Freight Class 150