Allegro 9200-01 Full Mask Supplied Air Respirator
Offers a portable, lightweight, air source for one worker
Includes one full mask supplied air respirators, a 1/4 hp pump and 50 feet of breathing air hose
FULL MASK RESPIRATOR:
•Durable silicone rubber
• Hypoallergenic and chemical/Ozone resistant
• Replaceable polycarbonate lens
• Removable hairnet
• Down tube comes with a 90 degree elbow that allows it to be directed over the shoulder
o OBAC quick-connect plug with wide diameter and minimal air restriction
PUMP: Type: Oil-less, rotary vane
Vanes: Carbon construction
Inlet Filter: 40.0 Micron bronze/steel (1/4 HP) 50 Micron felt material with metal grid inlet filter housing
Exhaust Filter: 0.3 Micron HEPA
Pressure Gauge: 1½” (3.8 cm) face, steel housing (0-15 psi) (0-1.03 bar)
Working Pressure: 2-12 psi (0.14-0.83 bar) (15 psi max) (1.03 bar max)
Performance: 0-5 CFM (0-8.5 m3/hr) (1/4 HP)
0-10 CFM (0-16.99 m3/hr) (3/4 HP)
0-20 CFM (0-33.98 m3/hr) (1½ HP)
MOTOR:
Type: ¼ HP, ¾ HP, or 1½ HP UL Listed
Volts: 115V/230V AC Single Ø
Power Required 5.5 A (1/4 HP), 8.3 A (3/4 HP), 16 A (1½ HP)
HOSE:
• Polyvinyl chloride with reinforced braided polyester yarn
• -20°F to 150°F (-28.8°C to 65.5°C)
• Maximum pressure 185 psi @ 70° F (12.76 bar @ 21.1°C)
Items included in this 9200-01 Full Mask Low Pressure System:
* Pump 1.4 HP Ambient air pump
* Breathing air hose 50 ft
* Full Face Mask
This supplied air respirator system is also available as a one worker two worker or three worker system with either 50' or 100' breathing air hose.
Part No. Allegro 9200-01 One Worker Full Mask System with 50' hose
Part No. Allegro 9210-01 One Worker Full Mask System with 100' hose
Part No. Allegro 9200-02 Two Worker Full Mask System with 50' hose
Part No. Allegro 9210-02 Two Worker Full Mask System with 100' hose
Part No. Allegro 9200-03 Three Worker Full Mask System with 50' hose
Part No. Allegro 9210-03 Three Worker Full Mask System with 100' hose
Free Shipping on Orders of Allegro Equipment over $650!
Write a Review
×