Allegro 9518-06 Venturi Blowers will help to create a safe and healthy working environment by removing welding fumes, hot air, gases and smoke quickly and easily. This venturi blower used saturated steam or compressed air for the power source. We offer many sizes of Venturi Blowers to meet your needs.
The Venturi Blowers from Allegro are a perfect solution to moving air in refineries, utility and power plants, shipyards, paper and pulp plants, the marine and steel industry and confined space manhole operations.
Compressed air or saturated steam is the power source for our Venturi Blower line. Small volumes of high velocity air (from compressed air source) run through the casting and out of the nozzle jets, creating a venturi action or pulling action that creates large volumes of air through the venturi blower and out the air diffuser.
A 1/2" hose with a "crows foot" connection is recommended from your air supply source to the side inlet connection. Operate this Venturi Blower on air or steam lines limited to 140 psi.
Cast aluminum base
1/2” Chicago (universal) style connection
Does not require protective grills
Noise level: 82.5 dB
Overall Length 44.25"
Diameter of Base 11.25"
Diameter Top of Horn 12.5"
NPT Size 1"
Bolt Circle Diameter 10.50"
Basic Slot Diameter 0.4
Net Weight 22.3 lbs.
Air Flow Inlet Pressure
40 PSIG 60 PSIG 80 PSIG
73CFM 98SCFM 124 SCFM
Total Air Flow
2385 CFM 2885CFM 3347CFM
*Models 9518-06 uses 16 inch ducting.
* Lightweight construction
* Convenient carry handles for one- person portability to any location
* No guards required
* Multiple inlet ports
* Sturdy steel galvanized steel diffuser
* All models include a crow's foot inlet connection
* Static ground is attached to the base of all blowers
* Single piece cast aluminum inlet housing
* See below for spec sheet on Allegro's Venturi Blower
Shipping weight and dimensions:
45" x 13" x 13"
Free Shipping on Orders of Allegro Equipment over $2500!